HLP-100
High-quality hydraulic oil for hydraulic, machine tool and pump equipment and hydraulic drive and hydraulic control systems of construction, road, agricultural and special machinery operating in harsh conditions where high levels of lubricating film strength and wear protection are required at high pressures and fluid flows. The oil contains a suitably selected additive package with anti-corrosion, anti-oxidation, lubricating, demulsifying and anti-foaming properties.
HLP series oils are specially designed for use in hydraulic systems of imported and domestic industrial equipment that require the use of high-quality alloyed oils.
The oil is produced on the basis of high-quality base oils with a high viscosity index and an ultra-stable additive package that neutralizes the formation of corrosive and aggressive materials, provides excellent anti-wear properties and compatibility with various metals, creates protection of thin oil films from oxidation, maintains the cleanliness of the oil and the system, and also controls the demulsifying ability of the oil in systems contaminated with a small amount of water.
Application advantages:
✓ meets the requirements of most equipment manufacturers;
✓ reduces the number of oil types required by the enterprise;
✓ reduces wear of system components due to an improved package of anti-wear additives;
✓ reduces the negative effects caused by the presence of water in the system;
✓ improved air separation and anti-foam properties, reduces the degree of air bubbles in the working part of the system, reduces the risk of pump damage;
✓ excellent viscosity-temperature properties;
✓ reliable operation of the hydraulic system in the required temperature range;
✓ high thermal-oxidative stability;
✓ stable chemical composition of the oil throughout its service life;
✓ high demulsifying and antifoaming properties;
✓ rapid separation of water and destruction of foam, which eliminates the increase in oil compression and improves its lubricating and cooling properties;
✓ exceptional antiwear properties;
✓ increased resource of hydraulic system components;
✓ excellent hydrolytic stability
✓ protection of hydraulic system parts from corrosion and other chemical influences.
Compliance with international standards: ISO 11158 HM, ISO-L-HM, DIN 51524-2 (HLP), SAE MS1004 Type HM, AIST (US Steel) 127, AFNOR NF-E-48603 (HM)
Tolerances: Bosch Rexroth RDE 90220, Parker Denison HF-0 /HF-1/HF-2 , Eaton (Vickers) I-286-S, Eaton (Vickers) M-2950-S
When choosing a hydraulic oil, be sure to pay attention to the operating manual of the machinery and equipment, which clearly indicates the required oil parameters - viscosity, application conditions and possible substitutes.
